A streamlined "bullet nose" throws like a football. The flattened back side gloms onto the PFD back, ready for deployment and use.

  • 55' of high-vis, floating solid core polypropylene rope (3/16" diameter, 700lbs tensile strength).
  • Carabiner doubles as a rip cord handle for easy twist deployment.
  • Unit mounts to the back center of the DESCENT, TOW mOtion and X-traxt-d PFD's.
  • Back side has belt loops to mount on Stohlquist QR Belts.
  • 1/4" thick PE float foam plate lays flush against the PFD back.
  • Flexible design allows for mounting on QR belt for left or right hand deployment.
  • Rope anchors to back plate for direct translation to torso energy, and feeds out through gusseted reverse taper of soft compressible 200D Oxford nylon.
  • Internal drawcord & barrel lock secures rope inside while not in use.
  • With a tug, the stopper knot "punches through" and releases.

A streamlined "bullet nose" throws like a football. The flattened back side gloms onto the PFD back, ready for deployment and use.

  • 55' of high-vis, floating solid core polypropylene rope (3/16" diameter, 700lbs tensile strength).
  • Carabiner doubles as a rip cord handle for easy twist deployment.
  • Unit mounts to the back center of the DESCENT, TOW mOtion and X-traxt-d PFD's.
  • Back side has belt loops to mount on Stohlquist QR Belts.
  • 1/4" thick PE float foam plate lays flush against the PFD back.
  • Flexible design allows for mounting on QR belt for left or right hand deployment.
  • Rope anchors to back plate for direct translation to torso energy, and feeds out through gusseted reverse taper of soft compressible 200D Oxford nylon.
  • Internal drawcord & barrel lock secures rope inside while not in use.
  • With a tug, the stopper knot "punches through" and releases.


Combo Kit includes SeaTOW Bag plus QR Belt.

Shock loaded tubular webbing absorbs impact from towing and stows compressed, close to your side. All models come with a paddler biner and 1/4" x 1 1/2" welded black oxide stainless steel O-ring that feeds into a PFD quick-release harness.The 4' SC Re-Traxt is designed with a hook & loop attachment piece for self-centering on the back of the DESCENT PFD. The 4' Re-Traxt and 12' Re-Traxt are compatible with the TOWmotion and X-traxt PFDs.



1 1/2" QR Belt

The 1 1/2" quick release rescue harness has been tested to withstand 1100 lb. loads. Trimmable to customize fit. Compatible with the DESCENT and TOWmotion PFDs. O-ring not included.

2" QR Belt

The 2" quick release rescue harness has been tested to withstand 1100 lb. loads. Trim-able to customize fit. Compatible with the X-traxt-d PFDs. O-ring not included.

The 1 1/2" welded black oxide, stainless steel O-ring is compatible with the TOW mOtion and X-traxt OR-belts. The self-centering 1 1/2" black oxide, stainless steel O-ring with an attached hook and loop piece is specifically designed for use with Descent PFD & QR-Belt.

This aluminum alloy PADDLE BINER easily clips onto your paddle shaft. Made in Italy.

Strength rating: 22.0kN, 8.0kN, 7.0kN

Weight: 8.0 grams

Dimensions: Length 116.0 mm, 30.0 mm